PSCockpit 2025 Run. Entering new world!

Time to launch a new run of the PSCockpit System!!

Those of you who don’t know yet how this system, please read the following links:

PS Cockpit System F16 distribution file for Main and Displays&Gauges boards: https://psfalcon.blogspot.com/2022/08/ps-cockpit-system-f16-distribution-file_17.html

PSCockpit System: PS Tools: https://psfalcon.blogspot.com/2025/01/ps-cockpit-system-description.html

PSCockpit Displays and Gauges: https://psfalcon.blogspot.com/2025/01/pscockpit-displays-gauges-system.html

More information, downloads and guides at:
https://psfalcon.blogspot.com/2015/05/pscockpit-system-up-to-date-software.html

This run features these new items:
Gear Landing Set



Canopy spider Set



Both sets 3D printed in PLA and come with their necessary elements (springs, switches, limit switches, 12V coil, pcb, for correct operation an interface with PSCockpit System or any other I/O system.
- Gear Landing Set: 90€
- Canopy Spider Set: 20 €

PSCockpit System Prices:
The prices of the PCB’s already mounted and tested are the following:
- Main Board V2 PCB: 80€
- Digital expander for 40 inputs/outputs: 33 €
- Digital expander 16 inputs/outputs: 10 €
- Steppers/Other voltage outputs pcb: 28 €
- 7 segment displays pcb for 6 displays: 18 €
- Analogue pcb for 4 inputs/ 1 output: 20 €
- Yellow OLED display (85mm x 40mm), 256x64 for DED or PFL: 65 €
- I2CtoSPI pcb: 25€
- Aircore Controller pcb: 24€
- Aircore pcb: 15€
- Vibration motors pcb: 38€
- I/O Enhancement pcb: 6,5€
- Caution Panel board: 40€
- UHF board: 90€
- ICP pcb Rev 1: 90€
- CMDS board (with 2 rotary switches 30º & 45º, no toggles, no displays): 80€
- CMDS options:
- Miniature toggles 6 mm diam. (1 with locking lever): 50€
- SGL2016 displays Not available
- HDLG-1414 displays: 35€ (each)
- 7 segment displays pcb with 8 displays: 35€
- TWP board: 40€
- TWA board: 20€
- X40 stepper board: 20€
- PWM board: 20€
- ELEC board: 50€
- AUDIO1 & AUDIO2 board: 100€
- TRIM board: 80€
- TRIM INDICATOR board: 15€
- ECM pcb: 100 €
- CPD pcbs for one CPD: 90€
- EHSI pcb: 20 €

PSCockpit Displays&Gauges System Prices:
The prices of the PCB’s already mounted and tested are the following:
- Displays & Gauges pcb: 55€
- X27 stepper pcb: 15€
- Eyebrow lights pcb: 15€
- Indexer pcb: 15€
- Engine Gauges for Aircores with electronics for PSCockpit System pcb: 90€
- Engine Gauges for X27 or Aircores without electronics: 65€
- Hyd pcb: 15€

Other components by demand:
- Engine Gauges, Eyebrow and Indexer panels
- Gauge panels
- Stepper motors X27
- Aircore Motors

- Shipments: 10€/ 18€ / 28€ depending on the total weight order and country

Time Line:
- Orders and payments will be accepted until Feb. 28th. 2025
- Only direct bank transfers. Sorry for the inconvenience.
- Delivery: From April 2025

Thanks everybody for your support.
Shep

PS Cockpit System Description

System Description

- One stop hardware and software for cockpit systems. Once the cockpit is connected you can configure the software individually for each sim.
- Easy configuration and setup for people without electronic knowledge.
- Avoid excessive wiring runs along the cockpit.

The system uses small satellite PCB’s that can be distributed along the cockpit. The communication between these satellite PCB’s and the Main PCB is done with only 2 wires (I2C protocol) plus the power cables. These wires can be connected in daisy chain. The idea is to wire each of the cockpit panels to only one satellite PCB. See F16 distribution example:



You can download at: Link

Supported devices
-   Digital inputs: Pushbuttons, 2 position switches, 3 position switches, digital encoders, BCD encoding (8 to 3, 16 to 4, 32 to 5) and 8x4 matrixes
-   Digital outputs and leds
-   Analogue inputs and outputs
-   Vibration motors
-   Aircores motors
-   Stepper motors: Unipolar, X27 and X40
-   RC Servomotors
-   Segment Displays: 7 segments and SLG2016
-   LCD displays: SSD1322 Graphic display 264x64, KS0108 Graphic display 128 x 64, KS0108B Text display 20x4, SSD1306 Adafruit 128x64 (ID938 and ID931)



More information, downloads and guides at http://psfalcon.blogspot.com.es/2015/05/pscockpit-system-up-to-date-software.html

Regards,
Shep

PSCockpit Displays & Gauges System Description

This PSCockpit Displays & Gauges System PCB drives the gauges and displays of the F16 pit reducing the load of the PSCockpit Main Board by reducing its processing time.

The Displays & Gauges Board is already configured giving a plug&play solution for people with less electronic knowledge.

PSCockpit users can use the same PSCockpit boards they already have in their pit and/or redistribute the boards between both systems PSCockpit Main Board and PSCockpit Displays & Gauges Board.

The modular concept of the Displays & Gauges Board allows users to select the displays and gauges they want to drive in their pit, adding other elements at any time.

For desktop pits or mini-pits users the Displays & Gauges Board can drive eyebrow lights, indexer lights and some other lights of the F16 Center console.



The Displays & Gauges Board is able to drive the following elements of the F16 pit:
- (2) x PSCockpit OLED displays for DED and PFL displays.
- (2) x Adafruit Monochrome OLED displays for Fuel Flow and Total Fuel indicators
- (14) x Stepper motors X40 or X27 for LIQ OXY, EPU Fuel, HYDA, HYDB, Total Fuel, Watch, Cabin Pressure, Roll Trim, Pitch Trim, Oxy Press, Speed Brake and Compass (with Unipolar Stepper Motor) gauges
- (4) x Aircore motors for Oil Pressure, Nozzle Pos, RPM and FTIT engine gauges.
- (2) x PSCockpit 16I/O boards for Eyebrow Lights, NWS and AOA lights, LG lights
- (1) x PSCockpit Caution Panel board.

The Displays & Gauges Board distribution for the F16 is the following:



You can download the F16 Displays & Gauges Distribution here: http://www.mediafire.com/file/j5p0gxo393t04q5/file

The Displays & Gauges Board has its own standalone software for Falcon BMS and DCS sims:



For new users, the Displays & Gauges Board, depending on your needs, can be completed with the following PSCockpit items:
- DED display: (1) PSCockpit OLED display
- PFL display: (1) PSCockpit OLED display
- Total Fuel Indicator: (1) PSCockpit X40 pcb + Adafruit display + X40 stepper motor
- Watch: (1) PSCockpit X40 pcb + Adafruit display + X40 stepper motor
- LIQ OXY, EPU Fuel, HYDA and HYDB gauges: (1) PSCockpit 16 I/O pcb + (4) PSCockpit X27 pcb + (4) X27 stepper motor
- Roll Trim, Pitch Trim, Oxy Press, Speed Brake gauges: (1) PSCockpit 16 I/O pcb + (4) PSCockpit X27 pcb + (4) X27 stepper motor
- Right Eyebrow and NWS lights: (1) PSCockpit 16 I/O pcb
- Left Eyebrow, AOA and LG lights: (1) PSCockpit 16 I/O pcb
- Caution Panel: (1) PSCockpit Caution Panel pcb
- Engine gauges: (1) PSCockpit Engine Motors pcb + (4) Aircore motors

You can find more info about PSCockpit system here:
http://psfalcon.blogspot.com.es/2015/05/pscockpit-system-up-to-date-software.html

Regards,
Shep

New version of PSCockpit software V1.0.6U2

New version of PSCockpit software V1.0.6U2 with Smart Lights controller:https://www.mediafire.com/file/fly8ouwsukvsyl5/PSCockpitV106U2Setup.zip/file

CHANGELOG V 1.0.6 U2
- Extended log file
- Corrected strip management on the Adafruit display.
- New option to read Sunrise y Sunset times from Briefing page.
- New Elapsed times table in USB settings.
- Corrected error in RUN mode when stopping PSCockpit.
- Shared Memory Area reader updated for BMS 4.37 U6
- Corrected stepper form error when no steppers are selected in the Airplane model
- New access to stepper configuration from the Main Page

Regards,

Shep

PSUdp Software V.1.0.3u5 Update for Falcon BMS 4.37U6 and DCS 2.9.1 with CPD

 

Change log:
PSUdp and CPD new version updated v1.0.3u5:
==============================
- Revised Shared Memory Area reader for BMS 437 U6
- Added new port to send BMS Kneeboard DDS or PNG pictures to view them in the CPD
- Added a MAP tool to generate airport maps from a .CAM BMS file to be used in the CPD
- Corrected the joystick buttons assignment in CPD joystick.
- PSGaugesV5u5: Added Kneeboard DDS textures.


You can download the installation file v1.0.3 u5 here:
https://www.mediafire.com/file/h85fp6f96czihf2/PSUdpV103u5Setup.zip/file

Do not forget to install and run this version with admin rights!

Installation notes:
- Unrar the file
- Install PS UDP in your computer with PSUdpV103u5SetUp.exe
- Install PSGaugesV5u5.apk in all your favorite android devices
- Read HelpV103.txt!!
- Enjoy

Regards,
Shep