Backlighting Leds PWM board

The PWM board has been designed to dim backlights leds of the PSCockpit panels and can be used for instrument backlights as well. The board is only 74x18mm and comes with a potentiometer with a switch to turn on/off and dim backlight leds.  You can easily mount the board with the potentiometer nut to your Lighting panel and connect the wires at the bottom of the board.



The nominal current for this board is 4Amps and it works in a range of voltage of 5VDC to 12VDC. The current of 4Amps allows to manage up to 200 led sets of 20mA.

Be aware that pulse width modulation can cause interference with other electronic devices. To avoid this undesired situation, use shielded cables and run the cable separately from other signal wires.

The PWM is a standalone board and it has no connection to PSCockpit software.

Regards,
Shep