PSCockpit 9th Run

Time to launch a new run of the PSCockpit System!!

Attending several requests from you, I’m launching the 9th Run of PSCockpit, but, due to the lack of free time, there won’t be any new board this year.

I’m still working on the PSCockpit Software update to correct some minor issues:
- Implementing VJoy for analogue inputs
- Updating software for BMS 4.34 U1
- Updating software for F16 DCS.
This update version will be launched on week 2 of year 2020.

Thanks everybody for the patient you´ve had this year and have a Merry Christmas

System Description
- One stop hardware and software for cockpit systems. Once the cockpit is connected you can configure the software individually for each sim.
- Easy configuration and setup for people without electronic knowledge.
- Avoid excessive wiring runs along the cockpit.

The system uses small satellite PCB’s that can be distributed along the cockpit. The communication between these satellite PCB’s and the Main PCB is done with only 2 wires (I2C protocol) plus the power cables. These wires can be connected in daisy chain. The idea is to wire each of the cockpit panels to only one satellite PCB. See F16 distribution example:



You can download at: http://psfalcon.blogspot.com.es/2016/12/ps-cockpit-system-f16-distribution-file.html

Supported devices
-   Digital inputs: Pushbuttons, 2 position switches, 3 position switches, digital encoders, BCD encoding (8 to 3, 16 to 4, 32 to 5) and 8x4 matrixes
-   Digital outputs and leds
-   Analogue inputs and outputs
-   Vibration motors
-   Aircores motors
-   Stepper motors: Unipolar, X27 and X40
-   RC Servomotors
-   Segment Displays: 7 segments and SLG2016
-   LCD displays: SSD1322 Graphic display 264x64, KS0108 Graphic display 128 x 64, KS0108B Text display 20x4, SSD1306 Adafruit 128x64 (ID938 and ID931)



More information, downloads and guides at http://psfalcon.blogspot.com.es/2015/05/pscockpit-system-up-to-date-software.html

Prices
The prices of the PCB’s already mounted and tested are the following:
- Main PCB: 60 €
- Digital expander for 40 inputs/outputs: 33 €
- Digital expander 16 inputs/outputs: 10 €
- Steppers/Other voltage outputs pcb: 28 €
- 7 segment displays pcb for 6 displays: 18 €
- Analogue pcb for 4 inputs/ 1 output: 20 €
- Yellow OLED display (85mm x 40mm), 256x64 for DED or PFL: 55 €
- I2CtoSPI pcb: 25€
- Aircore Controller pcb: 24€
- Aircore pcb: 15€
- Vibration motors pcb: 38€
- I/O Enhancement pcb: 6,5€
- Caution Panel board: 40€
- UHF board: 90€
- ICP pcb Rev 1: 90€
- CMDS board (with 2 rotary switches 30º & 45º, no toggles, no displays): 80€
- CMDS options:
   - Miniature toggles 6 mm diam. (1 with locking lever): 40€
   - SGL2016 displays: 35€ (each)
   - HDLG-1414 displays: 20€ (each)
   - 7 segment displays pcb with 8 displays: 35€
- TWP board: 40€
- TWA board: 20€
- X40 stepper board: 20€
- PWM board: 20€
- ELEC board: 50€
- AUDIO1 & AUDIO2 board: 100€

- Shipment: 15€ / 25€ depending on the total weight order

Time Line:
- Orders will be accepted until Jan. 19th. 2020
- Only direct bank transfers for payments. Sorry for the inconvenience.
- Delivery: Starting March 2020

Regards,
Shep